Quatech Audio/Video Capture USB 2.0 Dokumentacja Pobierz pdf (Strona 340)

13-22 z.one ultra and z.one ultra sp OPERATOR MANUAL

4. Fill in the data fields (Table 13-7) and click Apply. The system returns to the

FTP Storage Administration screen (Figure 13-17).

5. To check the connection:

a. Select Ping on the FTP Storage Administration screen.

 If a low-level network connection has been made, the following

message appears:

ICMP Echo: xx.xx.xx.xx is alive [xx.xx.xx.xx is the IP address of the

configured device].

 If a connection has not been made, the following message appears:

ICMP Echo: xx.xx.xx.xx timed out [xx.xx.xx.xx is the IP address of

the configured device].

b. Select Verify on the FTP Storage Administration screen.

 If connection has been made, the following message appears:

Verification of communication succeeded

 If connection has not been made, message Connection failure displays.

If so, repeat procedure from Step 1 or contact your network/PACS

administrator.

6. To exit, press Enter (Enter/Select for SmartCart sp) or Freeze to return to live

imaging.

Table 13-7. FTP Storage Destination Parameters

Parameter Description

Setup

External media image format ■ DICOM or Non-DICOM

Select desired format.

Nickname

e.g., Default Ftp Host

■ Informal name to identify site to users in

department. This name is typically assigned

by department.

IP Address ■ Network IP address assigned by IT Admin

for target location.

Port Number ■ Port number assigned by FTP Admin for

target location. Default port is 21.

User Name ■ Fill in as required

Password ■ Fill in

Confirm ■ Fill in

Data Transfer Mode ■ Select Active or Passive

Close Connection ■ Select desired option

Remove embedded icon/thumbnail image ■ Check box to remove

DICOM Export Options

Compression Type ■ Check box. Then select desired

compression type from drop-down box (see

“Compression Settings” on page 11-3).

1 2 ... 335 336 337 338 339 340 341 342 343 344 345 ... 403 404

Komentarze do niniejszej Instrukcji

Brak uwag

Quatech Audio/Video Capture USB 2.0 Dokumentacja Strona 340

Komentarze do niniejszej Instrukcji